Hytera PD68X, Руководство пользователя

Страница: 36 / 49

Turning On or Off the Homestation Hunt
Feature
In an overlapping area, it is recommended that you request the dealer to set
the frequently used channel as the homestation channel and enable the
Homestation Hunt feature. In this case, the radio operating on another
channel switches back to the homestation channel after the signal strength
of the homestation channel reaches the preset threshold.
To turn on or off this feature, go to Menu > Hunt > Homestation Hunt , and
then select Enable or Disable .
Turning On or Off the Handover Feature
The Handover feature prevents call drops or discontinuous voice caused by
low signal strength. With this feature enabled, the radio automatically
switches to another BS with higher signal strength if the signal strength of
the current BS goes below the preset threshold during a call.
To turn on or off this feature, go to
Menu
>
Hunt
>
Handover
>
Handover
On/Off , and then select Enable or Disable .
To set whether handover is allowed during transmission, go to Menu > Hunt
>
Handover
>
Handover in Tx
, and then select
Enable
or
Disable
.
Roam
The Roam feature allows you to enjoy seamless communication across sites
or networks.
In conventional mode, you can turn on or off this feature as follows: Go to
Menu > Roam > Roam On/Off , and then select On or Off .
In trunking mode, this feature needs to be turned on or off by your dealer.
Talk Around
The Talk Around feature allows the radio to continue transmitting and
receiving when the repeater is not operating, or when your radio is out of
the repeater's coverage but within other radio's coverage.
To turn on or off this feature, go to Menu > Settings > Radio Set > Talk
Around , and then select Enable or Disable .
TOT
The TOT feature allows the radio to automatically stop transmission and
keep beeping when the period preset by your dealer expires. To stop
beeping, release the
PTT key. You need to wait for a certain period (also
preset by your dealer) to initiate transmission again.
This feature aims to prevent a radio user from occupying a channel for an
extended period and to avoid radio damage due to overheating.
31