Hytera PD68X, Руководство пользователя

Страница: 35 / 49

Setting a Priority Channel
You can set a channel in the scan list as priority channel 1 or 2, which will
be scanned more frequently than a non-priority channel.
To set a priority channel, do as follows:
1. Go to
Menu
>
Scan
>
Scan List
, and then select the required scan list.
2. Select Edit/View , and then select the required channel.
3. Select Edit Prio CH > Set PrioCH-1 / Set PrioCH-2 .
To change a priority channel to a non-priority channel, select the priority
channel marked with
or , and then select Edit Prio CH > Disable
PrioCH
.
Deleting a Channel from a Scan List
1. Go to Menu > Scan > Scan List , and then select the required scan list.
2. Select
Edit/View
, and then select the required channel.
3. Select Delete CH .
Hunt
In trunking mode, the radio must register with a BS for normal operation.
The Hunt feature allows the radio to:
l
Hunt through the Trunked Station Control Channels (TSCCs) for an
available BS for registration.
l
Always work under a BS with higher signal strength after registration,
ensuring smooth communication.
Selecting the Mode for Fixed TSCC Hunt
If the radio is preprogrammed by your dealer to use the Fixed TSCC hunt
for registration, you can go to
Menu > Hunt > TSCC Hunt , and then select
one of the following modes as required:
l
Comprehensive Hunt : allows the radio to hunt all TSCCs within the
preset frequency range.
l
Short Hunt : allows the radio to hunt the TSCCs in the fixed TSCC list
predefined by your dealer.
l
Team Hunt : allows the radio to hunt the TSCCs in the team hunt list
predefined by your dealer.
Turning On or Off the Background Hunt
Feature
The Background Hunt feature allows the radio in standby mode to keep
detecting the signal strength of the current BS. If the signal strength goes
below the preset threshold, the radio switches to another BS with higher
signal strength.
To turn on or off this feature, go to Menu > Hunt > Background Hunt , and
then select Enable or Disable .
30