Owner’s Manual
Call Services
19
¾
If it is an incoming call with Direct Signaling, there will be an alert tone to inform the called party
that a call is received..
¾
If it is an incoming call with Hook Signaling, the terminal sounds alert tone to inform the called
party that there is an incoming call. And to receive the call, the
PTT
key or
should be pressed.
After the call is established, both parties can talk at any time, with no need to use any key.
Note:
There may be an exception, that is, if your terminal has been programmed to transmit
using
PTT
in a full-duplex call, you have to hold down
PTT
to talk. In this case, you may
miss voices from the other party when both parties are talking.
Hanging up/ Rejecting an Individual Call
When initiating the individual call, press the
Back
key or
to terminate it.
In the presence of an incoming individual call, press the
Back
key or
to reject it.
In the process of an individual call, any party can press
to terminate it.
8.1.2
Group Call
Initiating a Group Call
In the home screen, you can initiate a group call to the default group by pressing
PTT
. To call other
groups, please do as follows:
Step 1
In the home screen, press the
Volume Control/Group Selector
knob and the icon
appears on the upper right corner of the screen.
Step 2
Rotate the knob to select a group.
Please perform this step as soon as the icon
appears; otherwise, you may fail to select.
Step 3
Press the knob or
OK
key to confirm your selection.
Step 4
Press
PTT
to initiate a group call to this group.
Answering a Group Call
You can receive a group call without any operation. To take the talk rights during the call, there are two
situations: 1) if you have no pre-emptive priority, hold down
PTT
to talk after the talking party stops
talking and releases its
PTT
; 2) if you have already been programmed with pre-emptive priority, hold
down
PTT
to talk at any time.
Hanging up a Group Call
The calling party can press
to exit a group call. And for the called parties in a group call, only those
enabled with “Hang Up” feature (programmable by the dealer) can exit a group call.
