Owner’s Manual
Before Use
7
4. Before Use
4.1
Installation
4.1.1
Installation Instructions
z
This terminal is designed for a 10.8–15.6V (typical: 13.2V) negative ground electrical system. Please
check the ground polarity and voltage of the vehicle power supply before you install this terminal.
z
Plan a proper position to ensure sufficient space for heat dissipation, thus avoiding unexpected
damage to other equipments in the vehicle due to overheating of the terminal that operates under
high current.
z
It is suggested to route the antennas and power cords in a concealed way, so that the driver can
access the controls and operate easily.
4.1.2
Installation Tools
Item
Qty.
Digital multimeter
1
Slotted screwdriver
1
Philips screwdriver
1
Torx screwdriver
1
Adjustable wrench
1
Hex socket sleeve kit
1
Electric iron (40W)
1
Electric drill (better with battery)
1
Needle nose pliers
1
Diagonal pliers
1
Cable tie
several
Insulation tape
several