example, Zone 1) appears, and then press or
to select the required zone.
l
Press the preprogrammed
Zone Up or Zone
Down
key to select the required zone.
2. Select a channel in one of the following ways:
l
Press on the remote speaker microphone until
a channel alias (for example, CHD1) appears,
and then press
or
to select the required
channel.
l
Press the preprogrammed
Channel
Up
or
Channel
Down
key to select the required
channel.
l
Press the preprogrammed
Preset
Channel
key to
switch to the preset channel.
If the Voice Notify feature is enabled by your
dealer, the radio announces the channel number
upon power-on or channel switching.
Trunking Mode
In trunking mode, the radio communicates with each
other through base stations after successful registration.
The radio can communicate with a group of radios or a
single radio.
Selecting a Subgroup
A subgroup is a group of group or private contacts. To
select a subgroup, do one of the following:
l
Press
on the remote speaker microphone until a
subgroup alias (for example, Subgroup 1) appears,
and then press or to select the required subgroup.
l
Press the preprogrammed
Subgroup Up
or
Subgroup
Down
key to select the required subgroup.
Selecting a Group or Private Contact
l
Press
on the remote speaker microphone until a
group or private alias (for example, Group Call 1)
appears, and then press or to select the required
group or private contact.
l
Press the preprogrammed
Group/Private Up
or
Group/Private Down
key to select the required
group or private contact.
Status Indications
LCD Icons
Icon
Radio Status
C
The radio operates in conventional mode.
X
The radio operates in eXtended Pseudo
Trunking (XPT) mode.
D
The radio operates in digital trunking mode.
A
The radio operates in analog trunking mode.
The number of bars indicates the volume.
There is no signal in conventional, XPT, or
TMDW mode.
The number of bars indicates the signal
strength in conventional, XPT, or TMDW
mode.
There is no signal in TM-DL mode.
The number of bars indicates the signal
strength in TM-DL mode.
The radio is scanning.
The radio stays on a non-priority channel.
Icon
Radio Status
The radio stays on priority channel 1.
The radio stays on priority channel 2.
The radio is roaming.
The radio is detecting available channels for
roaming.
/
The radio operates in low/high power mode.
The Global Positioning System (GPS) feature
is enabled, and the radio is receiving GPS
data.
The GPS feature is enabled, but the radio
receives no GPS data.
The Scrambler or Encrypt feature is enabled.
The radio is in emergency mode.
The fan is operating properly.
The fan fails to operate.
A private call is in progress.
/
The radio is initiating/receiving a private call.
A group call is in progress.
/
The radio is initiating/receiving a group call.
An all call is in progress.
/
The radio is initiating/receiving an all call.
5
