57
2. Release
the
Monitor
key to exit.
3. There is only one monitor mode (carrier monitor).
Scrambler
Press the key programmed as
Scrambler
to prevent the third party eavesdropping your communication. The LCD displays
“Scrambler On”.
Press the key again to disable the Scrambler feature. The LCD displays “Scrambler Off”.
The Scrambler status will not be memorized once the radio is off and back on.
Scrambler Backup
Press the key programmed as
Scrambler
to prevent the third party eavesdropping your communication. The LCD displays
“Scrambler On”.
Press the key again to disable the Scrambler feature. The LCD displays “Scrambler Off”.
The Scrambler status will be memorized after the radio is off and back on.
Squelch Off
z
Squelch Off
Press the key programmed as
Squelch Off
to open squelch with icon
on the LCD. Press the key again to exit.
z
Squelch Off Momentary
Press the key programmed as
Squelch Off
to open squelch with icon
on the LCD. Release the key again to exit.
Talk Around
Press the key programmed as
Talk Around
to enable the Talk Around feature. The LCD displays “TalkAround On”. When
enabled, the Rx frequency is used in place of the Tx frequency when transmitting, and the decoding CTCSS/CDCSS is used
in place of encoding CTCSS/CDCSS.
Press the key again to disable the feature. The LCD displays “TalkAround Off”.
Power Select
Each channel is preset with different power levels.
The radio can operate at high power when further distance is required, or at low level to save battery.
Press the key programmed as
Power Select
to select and save high/low power. The LCD displays icon
.
