manualshive.com logo in svg

HYT TC-780M, Руководство пользователя

Поделиться
Скачать
HYT TC-780M Скачать руководство пользователя страница 10

 

9

Battery Information 

Initial Use 

New batteries are shipped uncharged from the factory. Charge a new battery for 5 hours before initial use. The maximum 

battery capacity and performance is achieved after three full charge/discharge cycles. If you notice the battery power runs 

low, please recharge the battery.   

Applicable Battery Packs 

To reduce the risk of injury, charge only the battery specified by the manufacturer. Other batteries may burst, causing bodily 

injury and damage. 

Caution: 

1.  To avoid risk of personal injury, do not dispose of batteries in a fire! 

2.  Dispose of batteries according to local regulations (e.g. recycling). Do not dispose as household waste. 

3.  Never attempt to disassemble the battery. 

Battery Tips

 

1.  When charging your battery, keep it at a temperature among 5

℃

 ~ 40

℃

 to ensure a full charge. Temperature out of the 

limit will significantly reduce battery life. 

2.  When charging a battery attached to a radio, turn the radio off to ensure a full charge. 

3.  Do not cut off the power supply or remove the battery when charging a battery. 

4.  Never charge a battery that is wet. Please dry it with soft cloth prior to charge. 

5.  The battery will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than 

normal, it is time to buy a new battery. 

To Prolong Battery Life 

1.  Battery performance will be greatly decreased at a temperature below 0

℃

. A spare battery is necessary in cold weather. 

The cold battery unable to work in this situation may work under room temperature, so keep it for later use. 

2.  The dust on the battery contact may cause the battery cannot work or charge. Please use clean dry cloth to wipe it 

before attaching the battery to the radio.   

Battery Storage 

1.  Fully charge a battery before you store it for a long time, to avoid battery damage due to over-discharge. 

2.  Recharge a battery after 3 months’ storage, to avoid reducing battery capacity due to over-discharge. 

3.  When storing your battery, keep it in a cool, dry place under room temperature. 

Charging the Battery

 

Содержание TC-780M








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды