TC-268/368
Service Manual
57
Adjust Description
Program TC-268/TC-368 via programmer or PC programming software, or manual adjustment. Adjust
TC-268/TC-368 in manual adjust mode as follows (refer to “software descriptions ” for the manual
adjusting and model setting).
. Instrument:
Ⅰ
1. Communication analyzer 1 set
2. Frequency scanner 1 set
3. 3A/10V power supply 1 set
4. Digital Voltmeter 1 set
5. 3A DC Ammeter 1 set
. Adjust:
Ⅱ
1. Initialization
:
It is necessary to initialize the transceiver because there is useless data in EEPROM. Short
circuit the SELF points on PCB, turn on the power till there comes the sound ”BEEP”, place the
channel selector knob at CH1[TC-268(1)] or CH2[TC-268(2)], or CH4[TC-368], press [MONI],
then press [PTT], to begin initializing the channel and other data. Please refer to the outcome of
initialization at”TC-268/TC-368 software description”.
2.Adjustment:
The adjustment of TC-268/368, some are conducted in normal mode, some are in manual
program mode. Turn on the power and enter the normal mode., at the same time, press the
PTT and MONI to turn on the transceiver
,
enter the manual program mode 3seconds later.(refer
to”TC-268/TC-368 software description” manual program mode).
VCO SECTION:
measurement Adjustment
ITEM CONDITION
Test
equip
terminal
part
Method
Specifications
/Remarks
1.Setting 1.power
7.5V
1.CH: TX HIGH
3.7V±0.1V
2.Transmit VCO
lock voltage
2.CH: TX LOW
check
TC-268>0.7V
TC-368 >1V
1.CH: RX HIGH
3.7V±0.1V
3.Receive VCO
lock voltage
2.CH: RX LOW
Digital
Voltmeter
CV
TC1
TC2
check
TC-268 >0.7V
TC-368>1V
Note:
if unlock VCO, check adjustment is enabled in manual mode.(signal could be transmitted regardless of
the lock of VCO in manual mode).
Содержание TC-268
