General Functions of the Interface
MAIN FUNCTIONAL REQUIREMENTS
• Set the truck configuration (levers and type
of front-end valves).
• Adjust flows and valve timing.
• Reset all changed parameters back to factory
settings.
• Provide ability to load settings from other
trucks.
• Disable features/parameters for diagnostic
reasons or personal preference.
• Select different languages (English, French,
German, Italian, Spanish).
WHAT IS NEEDED FOR THE HYDRAULIC
USER INTERFACE PROGRAM
1.
A PC with the Hydraulic User Interface Pro-
gram installed and a free USB port.
2.
An IFAK interface (Hyster part number
1532578) and a IFAK Interface Cable (Hys-
ter part number 1534009) to connect the PC
with the controller on the truck.
3.
A truck equipped with a hydraulic controller.
Installation of the Program
The Hydraulic User Interface program is available
via Hypass Online.
After downloading the program, double-click the in-
stallation icon. The program automatically installs
the Hydraulic User Interface Program and all re-
quired drivers for the IFAK interface cable.
After installation is complete, the IFAK interface
cable can be connected to the truck at the three-pin
Deutsche DT connector in the side console.
Connect the other end of the cable to a free USB
port on the PC.
Double-click the Hydraulic User Interface Program
icon. See Figure 2. The icon is placed on the PC
desktop after installation.
Figure 2. Service Icon
After starting the program, a warning message dis-
plays. See Figure 3. This warning message is gen-
erated because the hydraulic user interface pro-
gram is designed to support multiple controllers
and the program has now detected that only one is
connected. To advance to the Start screen, simply
click on the Cancel button.
Figure 3. Warning Message
The Hydraulic User Interface Program screens lis-
ted below are accessible at dealer level and related
parameters are adjustable.
General Functions of the Interface
2200 SRM 1481
8
