Figure 17. Display Switch Cluster
Legend for Figure 17
1. SCROLL DOWN
2. SCROLL UP
Parking Brake Repair
REMOVE AND DISASSEMBLE
Dry Brake System
If lever assembly for parking brake must be re-
moved from cowl, use the following procedure. See
Figure 18
1.
Block wheels front and rear side of the wheels
to make sure lift truck cannot move. Release
parking brake lever.
2.
Remove four capscrews that fasten bracket for
parking brake to cowl. Remove bracket and
brake lever assembly.
3.
Loosen jam nuts that fasten threaded ends of
brake cables to brake lever assembly.
4.
Turn adjuster knob counterclockwise until
brake cables are loosened. Disconnect cables
from link.
5.
Service brake assembly must be removed before
parking brake cable can be removed from back
plate of service brake. A snap ring holds sheath
of parking brake cable in back plate of service
brake. Remove snap ring and remove parking
brake cable from back plate.
1800 SRM 1743
Service Brakes Repair (Dry Brake)
19
