General
DRY BRAKE SYSTEM
This section has service procedures for dry brake
system. Dry brake system includes the following
parts: master cylinder, brake shoes, wheel
cylinders, and parking brake system. See Figure 1.
1. PARK BRAKE LEVER
2. ADJUSTMENT KNOB
3. PARK BRAKE CABLES
4. INCHING/BRAKE PEDAL
5. MASTER CYLINDER
6. BRAKE ASSEMBLY
7. BRAKE POSITION SENSOR (RIGHT HAND
SIDE)
Figure 1. Brake System
WET BRAKE SYSTEM
Wet brake system in this section includes the
following parts: master cylinder and parking brake
system. See Figure 2.
Wet disc brakes are a component of wet brake drive
axle. Brake discs are located inside planetary
carrier housing on left side of drive axle. See Drive
Axle Repair (Wet Brake) 1400SRM1679 for
remove and install procedures. See Figure 2.
1. PARK BRAKE HAND LEVER
2. INCH/BRAKE PEDAL
3. MASTER CYLINDER AND BOOSTER
4. PARK BRAKE LEVER
5. WET DISC BRAKE HOUSING
6. PLANETARY CARRIER HOUSING (RIGHT SIDE
SHOWN)
7. BRAKE OIL SUPPLY HOSE
8. ADJUSTMENT KNOB
9. BRAKE POSITION SENSOR
10. BRAKE POSITION SENSOR CONNECTOR
11. BRAKE OIL RESERVOIR
12. PARKING BRAKE CABLE BRACKET
13. PARKING BRAKE CABLE
Figure 2. Wet Brake System for Lift Truck Model
H2.0-3.5FT (H40-70FT) (P177)
1800 SRM 1743
General
1
