Hyster C236, Руководство по обслуживанию и ремонту

Страница: 12 / 25

Wires with the same number are interconnected
through splices and connectors, and therefore have
the same electrical function.
When a circuit is spliced into several wires, or
when a wire passes a connector, each wire number
receives the next unique suffix letter. An example
is 42-a, 42-b.
To simplify the schematic, sometimes the identifi-
cation has been omitted for a spliced function. It
may concern an intersection between a switch and
a splice, or a right-hand component operating si-
multaneously with a left hand component.
There is a wire number overview in Diagrams
8000SRM1725. In this overview each wire is listed
with the wire harness it is part of, and with the
connector identification number and pin numbers it
connects to. The actual location of a connector code
can be looked up in Connector Overview.
Electrical Wire Colors
In addition to the function ID numbers on the elec-
trical wires, different wire isolation colors are used
to identify the circuit levels. See Table 3.
Wire Harnesses
Wires are bound together in wire harnesses to se-
cure against the adverse effects of vibration, abra-
sion and moisture. The description of wire har-
nesses follows from its location in the truck or from
the functions it connects with.
Figure 2 provides an overview of the different har-
nesses that belong to the different truck options
and their connector numbers.
Figure 14 through Figure 22 shows a 3D-view of
most of the wire harnesses with their terminals
and connectors. The legends for these figures men-
tion the connector codes and connector description
for verification. See also Wire Harness Identifica-
tion and Connector Location.
Electrical Schematic and System Description 2200 SRM 1944
6