Hyster C236, Руководство по обслуживанию и ремонту

Страница: 10 / 25

Legend for Figure 1
1. ROW LETTER - A
2. COLUMN NUMBER - 30
3. WIRE HARNESS NAME - SIDE CONSOLE
4. WIRE HARNESS NAME - FRAME
5. WIRE CONTINUATION LOCATION- [20, E]
6. MEGA FUSE - 100 AMP
7. WIRE NUMBER AND COLOR - 761-F-WHITE
8. RELAY - STARTER
9. SHEET NAME - ENGINE
10. SPLICE - S761A
11. DIODE BLOCK
12. CONNECTOR - CPS07
13. CONNECTOR - CRP07
14. FUSE - 5 AMP
15. HARNESS DIVIDING LINE
SCHEMATIC LOCATION NUMBER
The schematic is divided into rows with a letter
from A to J and into columns numbered 0 to 9 for
each sheet. See Figure 1.
The column numbering consists of the sheet num-
ber plus the column number. For example, column
57 is the 7th column on sheet 5.
The schematic location number is the combination
of a row letter and column number, which allows
quick identification of a point on the schematic. For
example, [57,A] is the 7th column on sheet 5, row
A.
ELECTRICAL COMPONENTS
Electrical components are indicated by a symbol
and a description that are placed close to each
other on the schematic. An example is the starter
relay on [38,C]. See Figure 1.
ELECTRICAL WIRES
Each electrical wire is indicated by a solid line and
has been identified with an identification number
and a color indication of the wire insulation. If a
wire continues on a different sheet, then the solid
line ends with an arrow and receives in addition
the schematic location number where this wire con-
tinues.
Wire Identification Number
Each electrical wire in the electrical schematic has
an identification number that is also printed on the
insulation of the wires.
The wire identification numbers consist of a func-
tion ID number and when needed a suffix letter.
The function ID numbers are numbered from 1
through 999. Specific ranges of numbers are as-
signed for different function ID groups. See Table 2.
Electrical Schematic and System Description 2200 SRM 1944
4