Hyster C219, Руководство по обслуживанию и ремонту

Страница: 12 / 21

H1 Truck Hours
The Truck Hours hourmeter accumulates time
when the key switch is in the ON position and the
operator presence switch is activated.
H2 Traction Hours
The Traction Hours hourmeter accumulates time
when the traction motor is activated.
H3 Pump Hours
The Pump Hours hourmeter accumulates time
when the lift motor is activated.
H4 Steer Hours
The Steer Hours hourmeter accumulates time
when the steer motor is activated.
H5 Odometer Hours
The Odometer Hours hourmeter shows the total
number of miles/kilometers driven based on the
traction hours.
H10 Display Hours
The Display Hours hourmeter shows the total num-
ber of hours of operation of the display.
H30 Traction Node Hours
The Traction Hours hourmeter shows the total
number of hours of operation of the traction con-
troller.
H41 Slave Traction Node Hours
The Steer Hours hourmeter shows the total number
of hours of operation of the steer controller.
H50 Pump Node Hours
The Pump Hours hourmeter shows the total num-
ber of hours of operation of the pump controller.
PERFORMANCE
The lift truck software allows for the setting of four
independent performance levels. See Table 4. When
the password setting is enabled, specific levels of
lift truck performance can be specified for any oper-
ator with a valid password for this lift truck. Lift
truck performance levels can only be set or altered
by a supervisor or technician. Scroll through the
Performance Level menu using the UP (#1) and
DOWN (#3) buttons and press the RIGHT (#2) but-
ton to enter the desired selection. Press the LEFT
(#4) button to return to the previous menu.
Table 4. Performance-Level Menu
PERFORMANCE
Press →
Button
P1
PERFORMANCE 1
↕
P2
PERFORMANCE 2
↕
P3
PERFORMANCE 3
↕
P4
PERFORMANCE 4
Supervisor-Level Menu 2200 SRM 2023
6