Hyster B460 K1.0H, Руководство по обслуживанию

Страница: 18 / 24

PRESENTATION
electrical system
All the motors benefit from the use of three phase AC alternate current technology: traction motor, steering
motor and pump motor.
The high battery efficiency is guaranteed by the regenerative nature of the breaking system, energy retrieval
during the cab lowering stage with the load on the forks.
The electronic controls Sicos, AC2 Traction, AC2 Pump, EPS AC and Mhyrio communicate via a CAN-Bus
system (Controller Area Network Bus).
Hydraulic system
The 12 KW pump motors provides high level performance thanks to the ON/OFF and proportional solenoid
valves for the fork/cab lifting/lowering operations with fluid operator movements.
Guidance system
For guidance in the aisle the trucks can be equipped with contrast rollers and photocells that detect the
presence of side guide rails, or with aerials for induction guidance thanks to an AC electronic control (wire
guidance).
In both cases, the traction wheel performs self-centering once the photocells or the aerials have detected
the aisle entrance.
Mast
The masts can be in two or three stages.
The rigidity and stability characteristics of the masts allow the forks to reach heights of over 8 meters.
The lifting cylinders are of the single acting hollow rod type, the single-acting solid plunger rod type or the
single-acting hollow plunger rod type.
SERVICE
trUCK presentation
The range of lift trucks for medium/high level load collection consists of two models, with a nominal load
capacity of 1000 kg:
•
K1�0M
• K1�0H