Differential Repair
1400 SRM 1426
STEP 5.
Install two capscrews removed in STEP 4 in location shown. Tighten each capscrew alternately, until drop box
housing can be removed. If the capscrews do not have enough threaded length, use a pry bar to finish removing
the housing.
STEP 6.
Remove outer tapered bearing from drop box hous-
ing.
1.
INSERT TWO CAPSCREWS
1.
OUTER TAPERED ROLLER BEARING
2.
DROP BOX HOUSING
3.
PINION SHAFT
4.
DRIVE AXLE CENTER SECTION
12
