HyQuest Solutions iRIS Under Cover, Руководство пользователя

Страница: 92 / 117

© 2022 HyQuest Solutions 92
Operation
Or in response to OUT2=0 from an unauthorised number and with a custom reject message of “SMS Number not valid”
WiFi – Change the state of the Wi-Fi access point in the iRIS.
This command can be used to turn on or off the Wi-Fi access point via SMS message, the same action as pressing and
holding the centre button (see section
Connecting to the iRIS 270 with iLink Desktop software via Wi-Fi (Windows 10)
or Turn off Wi-Fi Access Point ). This can be of use if the keypad of the iRIS is not easily accessible.
To turn on the Wi-Fi send the message:
WiFi on
To turn off the Wi-Fi send the message:
WiFi off
4.6 File Transfer Protocol (FTP) Operation
The iRIS acts as an FTP client, when requested to connect to a given FTP server it will upload a file containing data since
the last upload. The iRIS can communicate with up to two servers at the same time, each has an associated independent
start of data pointer, which means only new data is uploaded not all data since beginning of memory. The data format
and file name convention are described in the following sections.
For more information, see the following subsections:
§
File Name Convention
§
CSV File Contents Format
§
ZRXP File Contents Format (2)
4.6.1 File Name Convention
The file name is made up of a five elements and inclusion/exclusion of the elements is user configurable via a set of check
boxes (see
TCP ). The possible elements are as follows:
§
Base File Name – this is a constant alphanumeric of up to 16 characters. Avoid using reserved characters such as \ /
:*?”<>?|
§
Serial Number – the serial number of the iRIS in the format AG5-XXXX where XXXX is a number between 0000 and
9999.
§
Site Name – the site name as configured in section System .
26
27
92
93
93
42
30