Hypontech HiManager, Руководство пользователя

Страница: 7 / 14


Put HiManager on a horizontal surface.
Please make sure to place HiManager on a horizontal surface to avoid
slipping down. Keep distance between HiManager and other cables to avoid
signal interference.
Mounting on wall:

Mark 2 drill holes on the wall and align them horizontally.

Distance between the center of marks should be 72mm .

Drill the holes using a 6mm bit to 30mm depth.

Insert the expansion bolts into the drill holes.

Insert the ST4.2 screws into the expansion bolts.

Do not fully tighten the screws to the end.

Leave the screw heads protruded from the wall surface for 4mm .

Align the mounting holes on the product to the protruded screws.

Hang the product onto the mounting screws.

Ensure the product is stably attached.
Mounting on DIN Rail

Mark 2 drill holes using the DIN rail as a template.

Distance between the center of marks should be 186mm.

Drill the holes using a 6mm bit to 30mm depth.

Insert the expansion bolts into the drill holes.

Position the DIN rail in alignment with the drilled holes.

Fix the DIN rail on the mounting surface with ST4.2 screws.

Place the product onto the DIN rail from above and hook it into place.

The product should audibly snap into place with the clamps at its back.

Ensure the product is stably attached.