Hypex Electronics FusionAmp OLED Display, Руководство пользователя

Страница: 11 / 12

11 10
Revisions
Notes
Revision Comment Date
Doc. HW.
01 01xx First release 12-02-2021
LIFE SUPPORT POLICY: Use of Hypex products in life
support equipment or equipment whose failure can
reasonably be expected to result in injury or death
is not permitted except by explicit written consent
from Hypex Electronics BV.
This Fusion OLED Display is designed for use with
Hypex Fusion Amp only. No representations are
made as to fitness for other uses. Except where
noted otherwise any specifications given pertain to
this Fusion OLED Display only.
Hypex Electronics BV, its affiliates, agents, and
employees, and all persons acting on its or their
behalf (collectively,“Hypex Electronics”), disclaim
any and all liability for any errors, inaccuracies or
incompleteness contained in any datasheet, user
guide or in any other disclosure relating to any
product.
Disclaimer
Date of purchase:
Hypex Electronics warrants this device for a period
of two years (B2C) after the original date of
p u r c h a s e a g a i n s t d e f e c t s d u e t o f a u l t y
workmanship or materials arising from Normal Use
of the device. The warranty covers working parts
that affect the function of the device. It does NOT
cover cosmetic deterioration caused by fair wear
and tear, or damage caused by accident, misuse or
neglect. Any attempt to modify or take apart the
device (or its accessories) will void the warranty.
If you discover a defect, notify Hypex Electronics
during the warranty period. Claims under warranty
must be supported by reasonable evidence that the
date of the claim is within the warranty period. To
validate your warranty, please keep your original
purchase receipt together with these warranty
conditions for the duration of the warranty period.
Replacement products claimed under warranty are
not entitled to renewed 2-year warranty coverage.
Limited Warranty
Performance:
96x64 Pixels
65536 Colors
Dimensions and weight:
External size (WxHxD): 43 x 35 x 7,5 mm
(excl connector)
RC5 IR sensor for Hypex Remote Control
On all Fusion Amps
Operation:
DSP313 (OEM only)
Total weight: 12,5 g
Remote:
(excl cable)
System information
How many Fusion OLED Displays can I use in
Q
a master and slave setup?
You can use a Fusion OLED Display with every
A
Fusion amp in your chain. Basically you only
need one at your master device. A FA slave will
not respond to IR commands, but the display will
function as expected.
I do not have any technical experience, can I
Q
install this display myself?
Yes! Even without any technical experience you
A
can install the display. Use this assembly
instruction.
After turning off my FusionAmp the display
Q
stays on for a couple of seconds, is this
normal?
Yes, this is normal. In order to shut down the
A
system gracefully, the DSP and Display shut
down time is delayed.
Yes, that is possible. Please refer to page 7
A
„Remote Control“.
Can I use a third party remote control?
Q
..........
No, updates for the display are seperate.
A
If I update the HFD software or firmware do I
Q
need to update the Display as well?
Frequently asked questions
We continuously work to improve your experience
with our products. If you have suggestions, remarks
or found a bug, please contact us.
If this assembly instruction is not sufficient in order
to fix your problem please contact the Hypex
support department.
The latest datasheets and manuals can be found
there. Look into our FAQ and if you can not find the
answer there, you can also contact us and we will be
happy to assist you!
If you have any problem with your Fusion OLED
Display please consult this assembly instruction.
Visit our website!
Support
No power
Ÿ
Check if the Fusion OLED Display cable is
connected correctly with your Fusion Amp or
DSP.
Ÿ
Check if your Fusion Amp or DSP is powered
on.
Troubleshooting