HyperX Cloud Buds, Руководство пользователя

Страница: 8 / 134

Document No. 480HX- HEBBXX.A01 HyperX Cloud Buds Page 7 of 7
Headset Charging
When the headset is connected to a charger with the USB charge cable, the status LED will indicate
the charge status. The headset will take approximately 3 hours to fully charge.
Status LED Charging Status
Breathing red Charging
Off Fully charged
Status LED Indicators
The status LED on the headset indicates the current state of the headset.
Status LED Headset Status
Flash blue every 5 seconds Connected to a device
Flash blue every 2 seconds Not connected to a device
Pairing mode Flashing red and blue
Factory reset Flash blue 5 times and light up red for 1 second
Factory Reset
To perform a factory reset on the headset, hold the power and volume up buttons together for 7
seconds. The status LED will flash red and blue 2 times, followed by solid red for 1 second. At the
same time, the headset will play two low beeps. After this, the headset will automatically turn off.
Questions or Setup Issues?
Contact the HyperX support team at: hyperxgaming.com/support/headsets