HYPERVSN Wall, Руководство по эксплуатации

Страница: 20 / 53

20 © Copyright 2018 HYPERVSN. All rights reserved
8. Unzip Router_config.zip file and launch updater.bat.
9. Wait for the program to configurate. The “SUCCESS!” message will appear when
the installation is complete.
Picture 17. Router configuration program
Note.
The default setting for the Wi-Fi hotspot:
• SSID : HW00001
•
Password : Kinomo987654321
(These credentials can be edited, contact support@hypervsn.com for
instructions).
5.3 DEVICES ACTIVATION (STEP 3)
Before you can use the Devices, you will first need to activate them and your licenses.
For these activation procedures, see the Device Operating manual (supplied with each
Device).
1. Repeat the activation procedure for each Device of the Wall and activate your
Device
’ s licenses.
Attention.
•
Licenses activations should be performed before a media content uploading.
Otherwise, it will not be launched.
•
License countdowns begin from the moment they are activated. Licenses are
defined for a fixed period. We recommend activating your license as late as
possible.
Licenses may be activated after completing the Wall installation.
• The Devices should have a Wall-enabled license.
2. Upon completion of the activation procedure, switch each Device to Operating
Mode.