Hyperlite Mountain Gear ULTAMID, Руководство пользователя

Страница: 9 / 16

SET THE CENTER POLE HEIGHT TO ~64“ (163CM) FOR THE
ULTAMID 2 AND ~75” (191CM) FOR THE ULTAMID 4.
NOTE – HOW HIGH THE CENTER POLE IS AND HOW MUCH GUYLINE IS
EXTENDED WILL AFFECT HOW CLOSE THE BOTTOM OF THE ULTAMID IS TO
THE GROUND.
UNZIP THE DOOR TO GET INSIDE THE ULTAMID AND
INSERT THE CENTER POLE.
ADJUST THE HEIGHT TO GET THE ULTAMID TAUT ON ALL
SIDES.
NOTE – TO ACHIEVE EVEN TENSION AMONGST ALL FOUR SIDE WALLS, YOU
MAY HAVE TO LOOSEN TIGHT GUYLINES, AND TIGHTEN THE OPPOSING
SIDES. EVENING OUT THE TENSION IS THE KEY TO FLAT, TAUT WALLS.
RE-ZIP THE ULTAMID DOOR AND MAKE ANY NECESSARY
ADJUSTMENTS TO THE STAKE OUT GUY LINES.
DIAGRAM 2.0
ULTAMID 2 :
64"
ULTAMID 4 :
75”



DIAGRAM 2.1