SET UP
Model #22576
10 x 10
Page 1
STEP 6
Lift up outer legs and slide out
the inner legs until the snap
button locks. Repeat on the
opposite legs.
01-22576
2/1/04
Missing Parts,Need Replacements,or Help
with Assembly Please Contact Customer Service:
1-800-524-9970
Please read instructions
COMPLETELY before assembly.
West Haven, CT 06516
"Sets Up in 60 Seconds!"
POP-UP CANOPY
No.
Part #
Qty
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
15266
15237
15270
15239
15240
15271
15274
15275
15277
15278
15279
15280
15281
15283
15284
15256
15257
15348
15285
15286
15287
15288
15289
15351
15263
15290
10431
Leg tube(A)
Plug for leg tube
Corner cover for leg tube
Inner washer for leg tube
Slide connecter for leg tube
Leg tube(B)
Gemel (Folding Holder) A
Gemel (Folding Holder) B
Slide tube(A)
Slide tube(B)
Inclined holding tube
Hex bolt 1/4" L40
Hex bolt 1/4" L37
Hex bolt 1/4" L26
Hex bolt 1/4" L25
Nut 1/4"
Spring pin fit for 15266
Spring pin fit for 15271
Top crest
Plug for gemel
Gemel Corner bush(A)
Gemel Corner bush(B)
Gemel Corner bush(C)
Gemel Corner bush(D)
PP washer
Cover
Anchors
4
4
4
4
4
4
4
4
4
20
16
12
52
56
44
24
20
12
4
4
4
4
1
1
8
8
12
CANOPY PART LIST
Page 4
01-22576
2/1/04
For Replacement Parts or Help with assembly, Please call:
Customer Service:
1-800-524-9970
8am-7pm
Mon-Sat EST
STEP 5
Attach the top to the frame by matching the loop fastening strip on
the frame. pull the corners down fully. Push the loop firmly together
at each corner.
STEP 1
Begin by placing your canopy near
the center of the set-up area. Along
with a helper grasp a canopy leg in
each hand. Slightly lift the frame off
the ground and step backwards,
pulling the frame apart until your
arms are fully extended as shown
in the illustration.
STEP 2
Carefully unfold the fabric top and
place it over the frame, making
sure to align the corners of the top
with the corners of the frame.
STEP 3
Do not put
your hand like
the picture.
While taking care not to pinch your fingers, grasp the frame section
marked "Open Here" and push up until the canopy is fully opened.
STEP 4
Slide the auto slider at
each corner up, while
holding the corner of the
frame down until the snap
button engages into the
hole. Then, pull the corner
of the cover down snugly.
