BEFORE YOU BEGIN
• The CONTROLLER SYNC BUTTON is located on the very top of the Scout near
the MICRO CHARGE PORT.
• The CONTROLLER LED INDICATOR is located on the face of the Scout near
the top.
• The DONGLE LED INDICATOR is located on the front of the DONGLE.
• The DONGLE SYNC BUTTON is located on the front of the DONGLE.
• The MICRO CHARGE PORT is located on the very top of the Scout.
SYNCING THE SCOUT
1. Connect the DONGLE to your SNES.
2. Press the CONTROLLER SYNC BUTTON once to begin syncing the Scout.
3. The CONTROLLER LED INDICATOR will quickly flash BLUE, then light up solid
BLUE when the Scout is fully synced. If the Scout is not synced, the
CONTROLLER LED INDICATOR will slowly flash BLUE. Pairing will take
about 5-10 seconds.
ONCE YOU'VE SYNCED
• Pressing the CONTROLLER SYNC BUTTON will turn OFF the Scout.
• Holding the CONTROLLER SYNC BUTTON for 2 seconds will turn ON the
Scout.
• Pressing ANY BUTTON or the D-PAD will WAKE UP the Scout if it has gone to
sleep.
CHARGE CABLE
DONGLE
CONTROLLER
CONTROLLER
DONGLE
CONTENTS
CONTROLLER SYNC BUTTON
CONTROLLER LED INDICATOR
D-PAD
DONGLE SYNC BUTTON
DONGLE LED INDICATOR
MICRO CHARGE PORT
SELECT BUTTON
START BUTTON
