Hypercom Optimum M4240, Краткое руководство пользователя

Страница: 17 / 20

17
Necessity of a login
The terminal must be logged in at the access point in order to use it. This procedure is known
as `pairing´.
If you receive the terminal from B+S at the same time as the access point, we will already have
performed pairing for you. You simply need to connect the terminal and the access point.
If you receive the terminal without an access point (as a result of an additional terminal being
requested, a supplementary delivery or a replacement following a fault), please perform initial
commissioning of the terminal, then carry out the pairing procedure described below for the
access point that you already have.
The terminal can only be logged in at one access point!
Please perform the initial commissioning of the terminal.
Manual pairing
Menü
Key Key
Administration
Key
Merchant
Key
BT login
Best
Key
Best
Key
Best
Key
Best
Key
Best
Key
RAS/BT functions
Best
Key
System files
Best
Key
Cable connection
Best
Key
Abbr
Enter
merchant
password
Switch on
terminal
remove
connecting
cable
Connect access point
to terminal via
connecting cable
4
Access Point
Serial port
Pairing connecting cable
Bottom of terminal
Power supply
NET ISDN LINE
or or
Please wait
Assignment
is made
Press the key repeatedly until `Please enter amount´ appears on the display.
Login at the access point