Hypercable Compack, Буклет

Страница: 30 / 68

30
4. Configuring & Monitoring the Power System
This chapter describes the available methods to configure and monitor the Compack -based DC power supply system from a computer.
For more detailed description of configuration options and other advanced networking services implemented by the controller, refer to the WebPower Online Help file that
you can download with the controller’s firmware.
Before configuring and monitoring the power system, the computer must be able to access the
Compack controller, which is described in chapter “Networking the Compack
Controller”, on page 16 .
For acronym descriptions, refer to chapter “Glossary”, page 44 .
You can configure and monitor the Compack -based DC power supply system from a computer — connected to a LAN or directly connected to the controller — using the
following methods:

Via a standard Web browser. The configuration Web pages are stored in the controller, so you do not need to install any programs in the computer.

Via PowerSuite application. The powerful PowerSuite application must be installed in the computer.

Via Network Management System (NMS) The NMS hardware and software must be installed in the network.
Figure 10 Power system configuration via Web browser, PowerSuite and NMS.