manualshive.com logo in svg

Hyper Rip Rail, Руководство пользователя

Поделиться
Скачать
Hyper Rip Rail Скачать руководство пользователя страница 26

A

D

JU

S

T

M

E

N

T

P

A

G

E

24

BMX Scooter

ASSEMBLY 

     WARNING: If you do not obey the following instructions, injury to the rider or to others 
      can occur:

Before you ride the BMX Scooter for the first time, check and adjust the brakes as written in the 
"Adjustments” section. Then test the brakes and practice using them at low speed in a large and level 
area that is free of obstruction.

When correctly used, the brake system is very effective.  

Always try to brake while going in a straight line. Apply brakes earlier in the following conditions: wet 
pavement, sand, gravel, leaves, or if you need to brake while turning.  To reduce the chance of skidding 
apply brakes intermittently.

If the rims are wet, start to brake earlier than normal because a longer distance to stop the BMX 
Scooter will be necessary.

Be careful when riding downhill or at a high speed because as your speed increases, a longer distance 
to stop the BMX Scooter will be necessary. Slow for curves because too much speed can force you to 
make a turn too wide.

Keep wax, oil, grease, etc. off the rims and the brake shoes. These lubricants will reduce brake 
performance and a longer distance to stop the BMX Scooter will be necessary.

Check and adjust the brakes the first time they do not stop the BMX Scooter quickly and smoothly, do 
not stop the BMX Scooter as well as they have in the past, or if either brake lever can touch the grip.

Содержание Rip Rail





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды