P
A
G
E
15
A
D
JU
S
T
M
E
N
T
BMX Scooter
ASSEMBLY
Put the handlebar in a comfortable position for the rider
WARNING:
if the handlebar clamp is not tight enough, the handlebar can
slip in the stem. This can cause loss of control
Tighten the bolts of the handlebar clamp. If the handlebar clamp has more than
one bolt, than tighten the bolts equally.
5.
Test the tightness of the stem: straddle the front wheel and hold it between
your legs.
Try to turn the front wheel by turning the handlebar. If the handlebar and stem
turn with out turning the front wheel, realign the stem with the front wheel.
Tighten the bolt tighter than you did before
(about half a revolution only at a time).
Do this test again, until the handlebar and stem do not turn without turning
the wheel
6.
Test the tightness of the handlebar: Hold the BMX Scooter stationary and
try to move the ends of the handlebar forward or backward. If the handlebar
moves , loosen bolts of handlebar clamps. Put the handlebar in
the correct position
Tighten the bolts of the handlebar clamp tighter than before If the handlebar
clamp has more than one bolt, tighten the bolts equally
Do this test again, until the handlebar does not move in
the handlebar clamp.
Handlebar and Stem (continued)
6
