HYOSUNG MONiMAX5100T Скачать руководство пользователя страница 4

Страница: 4 / 45

Operator Manual Chapter1. Preface

Hyosung TNS Inc.

1-1

Chapter1. Preface

Purpose

▶

This manual is produced to describe how the customers operate Hyosung TNS

’s

MX5100T.

This manual details how the customers replenish the notes and paper and how they
remove the jam at the MX5100T.

Audience

▶

Customers and staffs of Hyosung TNS who use and operate the MX5100T in each

branches of bank.

Support Information

▶

If any question or error occurs while operating MX5100T in compliance with this

manual, please contact maintenance staffs of Hyosung TNS.
For the contact of maintenance staffs of Hyosung TNS, see the E-mail addresses and
telephone numbers provided separately.

What is in This Manual

► MONiMAX referred to as “MX”

► This manual is designed to provide the operation guide for the MX5100T and the

detailed description of the following:

▪ Replenishing the notes and the receipt paper

▪ Emptying the notes

▪ Removing the jam like the notes and the receipt paper

▶

All information described in this manual is a licensed product of Hyosung TNS.

Some of the information in this manual may differ according to the network processor to
be connected and may be

subsequently updated by the bank’s needs or the improvement

by Hyosung TNS.

It is the policy of Hyosung TNS to improve products as new technology, components,

software, and firmware become available. Therefore Hyosung TNS reserves the right to
change specifications without notice.

Содержание MONiMAX5100T











































Результаты поиска

Содержание MONiMAX5100T

Отзывы:

Похожие инструкции для MONiMAX5100T

Бренды по названию

Популярные бренды

HYOSUNG MONiMAX5100T, Руководство оператора

Результаты поиска

Содержание MONiMAX5100T

Отзывы:

Похожие инструкции для MONiMAX5100T

Бренды по названию

Популярные бренды