HYOSUNG GV125S, Руководство пользователя, Страница: 87 / 101

—
84
—
⊙
INSPECTION OF LAMPS
●
Check if the position
lam p, m eter lam p, tail
lam p
and license plate
lamp work well when the
ignition switch was turned to
the ― ‖ position.
Check if the head lamp
work well when starting the
engine.
●
Check if the brake lamp
work well when the front
brake lever or rear brake
pedal was operated after the
ignition switch was turned to
the
“ ”
position.
●
Check if the turn signal
lamp work well when the
turn
signal switch was
operated after the ignition
switch was turned to the
“ ”
position.
●
Check if the head lamp,
tail lamp, turn signal
lamp and brake lamp are
dusty or dam aged.
The position lamp, meter
lamp, tail lamp and license
plate
lamp on this
motorcycle alw ays comes
on when the ignition switch
is turned to the
“ ” position.
The head lamp is always lit
when starting the engine.
⊙
REPLACEMENT OF THE
LAMP
Requirement electric power
of the lamp shown in the
following chart. When replace
the damaged lamp, always
use the equal capacity.
The use of a lamp other than
specification may cause the
electric system or the lamp to
damage.
NAMES CAPACITY
Head
lamp
HI / LO
12V - H4 :
60 / 55W × 1
Position
12V - W5W × 1
Brake / Tail lamp
LED type
Turn signal lamp 12V - R10W × 4
License plate
lamp
12V
– LED
type
※
LED : Light Emitting Diode