HYOSUNG GV125S, Руководство пользователя, Страница: 45 / 101

—
42
—
●
Release the starter
switch immediately after
the
motorcycle has
started.
●
Avoid pressing the
starter switch when the
engine is running, or the
starting motor damage.
●
Do not engage the
starting motor for more
than five seconds at a
time as it may over- heat
the wiring harness and
starting motor.
If the engine does not
start
after several
attempts, check the fuel
supply
and ignition
system.
The position lamp, meter
lamp, tail lamp and license
plate
lamp on this
motorcycle alw ays comes
on when the ignition switch
is turned to the
“ ”
position.
The head lamp is always lit
when starting the engine.
Push the starter switch to start
the engine after the needle of
the speedometer turn back to
the rest position.
The engine warning lamp
“ ”
①
comes on when the ignition
switch is set to
“ ”
position with
the engine stopped as a test of
engine system operation.
As soon as the engine starts,
this lamp should go out.
If the engine system fails, the
yell o w e n g i n e w a r n i n g
l a m p
“ ”
①
comes on and
remains on.