HYOSUNG COMET 125 - SERVICE, Руководство пользователя, Страница: 64 / 82

64
◉ ◉
REAR BRAKE FLUID SUPPLY
1. Place the motorcycle on a level surface
and keep the handlebars straight.
2. Clean the brake fluid reservior around not
to allow dust to get inside of it.
3. Turn the cap to the counter - clockwise.
4. Replenish with brake fluid to the upper
line.
N O T E
The recommended brake fluid
: DOT3 or DOT4
5. Fasten the cap.
Do not spill any brake fluid on painted or
plastic surfaces as it will damage the
surface severely.
CAUTION
◉ ◉
BRAKE DISK INSPECTION
Check the brake disk for damage or cracks.
◉ ◉
FRONT BRAKE FLUID SUPPLY
1. Place the motorcycle on a level surface
and keep the handlebars straight.
2. Clean the brake fluid reservior around not
to allow dust to get inside of it.
3. Loosen the screw and open the cap.
4. Replenish with brake fluid to the upper
line.
N O T E
The recommended brake fluid
: DOT3 or DOT4
5. Fasten the cap.
◉ ◉
FRONT BRAKE LAMP SWITCH
The front brake lamp switch is located
beneath the front brake lever. Loosen the
switch fitting screws and adjust the timing by
moving the switch body forward or
backward.
◉ ◉
REAL BRAKE LAMP SWITCH
The rear brake lamp switch is located at
right-side of the engine.
Move the switch up or down to adjust it
until the switch operates and turns on the
brake lamp after the brake pedal begins to
be depressed.
*GT250R/S영문내지/060207 2006.2.7 6:34 PM 페이지64 001 PagePro 9100 300DPI 100LPI