HYOSUNG COMET 125 - SERVICE Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 82

HYOSUNG COMET 125 - SERVICE Скачать руководство пользователя страница 3

3

All information, illustrations photographs

and specifications contained in this manual
are based on the latest product information
available  at  the  time  of  publication.  Due  to
improvements or other changes, there may
be  some  discrepancies  in  this  manual.
Hyosung  reserves  the  right  to  make
changes at any time.

Please note that this manual applies to all

specifications for all respective destinations
and explains all equipments. Therefore,
your model may have different standard
features than shown in this manual.

HYOSUNG MOTORS & MACHINERY INC.

�

COPYRIGHT HYOSUNG MOTORS & MACHINERY INC.

FOREWORD

THANK YOU for choosing

Hyosung

motorcycle. We at

Hyosung

have

designed,  tested  and  produced  this
motorcycle  using  the  most  modern
technology  available  to  provide  you  with
much  happy,  enjoyable,  safe  riding.
Motorcycling is one of the most exhilarating
sports  and  insure  your  riding  enjoyment,
you should become thoroughly familiar with
the  information  presented  in  this  Owner's
Manual before riding the motorcycle.

The proper care and maintenance that

your motorcycle requires are outlined in this
manual.

By following these instructions explicitly

you will insure a long trouble-free operating
life for your motorcycle. Your

Hyosung

dealer has experienced technicians that are
trained to provide your machine with the
best possible service with the right tools and
equipment.

*GT250R/S영문내지/060207

2006.2.7

6:33

PM

페이지3

001

PagePro

9100

300DPI

100LPI

«
1
2
3
4
5
...
»

Содержание COMET 125 - SERVICE



















































































Отзывы:

Нет отзывов