39
© Erwin Hymer Group North America, Inc., R00
summer mode, you don't have to worry about which tank has water - with the tank isolator valve open, water from the interior tank replenishes
water from the exterior tank as it is used.
•
To fill the interior tank only, close the tank isolator valve and set the tank selector valve to the interior position. The interior fill is located in the
rear door on the right side. With the tank isolator valve closed, running water into this fill port will fill the interior tank only - approximately 10
gallons.
•
To fill both interior and exterior tanks, open the tank connection valve and set the tank selector valve to the exterior position. Fill exterior tank
first, then interior tank.
Roadtrek recommends that you use a dedicated single purpose potable-water hose. These are usually white in color. Buy a new one and use it only for
filling your tanks and connecting to city water. View any hose lying around a campground with extreme skepticism, especially if there's a wastewater dump
nearby. Large RVs use hoses to flush their wastewater system. Always flush faucet and hose thoroughly before use.
Exterior tank fill location (driver’s side door pillar)
Tank selector valve in exterior tank position
Tank selector in interior tank position
Interior tank fill location (rear door, right side)
