21
© Erwin Hymer Group North America, Inc
Optional Folding Mattress for Front Bed
Step 1 - Positioning the front swivel seats:
•
With both the driver and passenger seats facing forward, lift the metal lever under the front
of each seat, and place the seats as far back as possible.
•
Pull the left plastic lever on the driver seat to place the seat-back in a vertical position.
•
Pull the right plastic lever on the passenger seat to place the seat- back in a vertical position.
•
Pull the right plastic lever on the driver seat to swivel the seat so that it is facing the
passenger side.
•
Pull the left plastic lever on the passenger seat to swivel the seat so that it is facing the driver
side.
•
Use the rotating knob to adjust the height of both driver and passenger seats to allow them
to be at the same height as the rear seat. (Picture 22.1)
Step 2 – Placing the bed support slats:
•
Place the short slat across the front seats. (Picture 22.2)
•
Place the long slat across the rear seat. Be sure this slat
extends all the way to the side panel on the passenger
side for greatest support. (Picture 22.3)
Picture 21.1
Picture 22.2
Picture 22.3