Page 15
Mounting principle
For wall mounting drill measures, please
consult the table above (measure A and B).
In case of no suitable wall available for
mounting the unit, it is recommended that
installation is made on brackets firmly
anchored in the floor.
»
mark the holes for the upper
suspension brackets
screws
»
drill holes and dowel
»
screw in the supplied mounting
screws; let the screws protrude
approx. 12 mm
/
.5 inch from wall
»
ensure firm fixation and load-carry-
ing capacity of the mounted screws!
»
hook in the unit and ensure safe
suspension
»
mark the holes for the lower suspen-
sion brackets screws
»
remove the unit
»
drill holes and dowel
»
hook in the unit and mount the lower
screws firmly
Wall clearances
When mounting the steam
humidifier, the wall clearanc-
es shown in the fig. below
must be obeyed::
* distance to designated paths
A
5 cm / 2,0 inch
B
50 cm / 19,7 inch
C
20 cm / 7,8 inch
D
60 cm / 23,6 inch
E
30 cm / 11,8 inch
A
B
C
D
E
Y
X
Z
*
device rear
suspension
brackets
