5
Specifications
Getting Started
Tools, Pipe, and Fittings, Other Materials
Pliers
Screwdriver
Teflon tape
Razor knife
Two adjustable wrenches
Additional tools may be required if
modification to home plumbing is required.
Plastic inlet and outlet fittings are included
with the softener. To maintain full valve
flow, 3/4” or 1” pipes to and from the
softener fittings are recommended. You
should maintain the same, or larger, pipe
size as the water supply pipe, up to the
softener inlet and outlet.
Use copper, brass or PEX pipe and fittings.
Some codes may also allow for PVC plastic
pipe.
ALWAYS install the included bypass valve,
or 3 shut-off valves. Bypass valves let you
turn off the water to the softener while still
having water throughout the house.
5/8” OD drain line is needed for the valve
drain. A 10’ length of hose is included.
with some models.
A length of 5/8” OD drain line tubing is
needed for the brine tank over flow fitting
(optional).
Nugget or pellet water softener salt is
needed to fill the cabinet or brine tank.
Continuous operation at flow rates greater than the service flow rate may affect capacity and efficiency performance.
The manufacturer reserves the right to make product improvements which may deviate from the specifications and
descriptions stated herein, without obligation to change previously manufactured products or to note the change.
The above capacity and flow rate specifications have not been validated by WQA.
Optional Settings - High Efficiency
Salt Used - Per Regeneration
2.3 lbs
3.0 lbs
2.3 lbs
3.0 lbs
4.5 lbs
6.0 lbs
9.0 lbs
Water Used - Regeneration
22.7 gal
28.3 gal
22.6 gal
31.6 gal
44.3 gal
60.9 gal
102.2 gal
Hardness Removal - Grains
11,250
15,000
11,250
15,000
22,500
30,000
45,000
Factory Settings - Standard Capacity
Salt Used - Per Regeneration
4.5 lbs
6.0 lbs
4.5 lbs
6.0 lbs
9.0 lbs
12.0 lbs
18.0 lbs
Water Used - Regeneration
40.5 gal
48.6 gal
34.0 gal
43.4 gal
62.7 gal
87.1 gal
139.2 gal
Hardness Removal - Grains
18,750
25,000
18,750
25,000
37,500
50,000
75,000
Optional - High Capacity
Salt Used - Per Regeneration
7.5 lbs
10.0 lbs
7.5 lbs
10.0 lbs
15.0 lbs
20.0 lbs
30.0 lbs
Water Used - Regeneration
56.1 gal
69.5 gal
49.6 gal
64.3 gal
90.3 gal
124.6 gal
196.2 gal
Hardness Removal - Grains
22,500
30,000
22,500
30,000
45,000
60,000
90,000
Resin Quantity - Cubic Feet
0.75 ft
3
1.0 ft
3
0.75 ft
3
1.0 ft
3
1.5 ft
3
2.0 ft
3
3.0 ft
3
Tank Size
9x35
10x35
8x44
9x48
10x54
12x52
14x65
Tank Jacket / Media Loaded
Yes
Yes
Yes
Yes
Yes
No
No
Brine Tank / Cabinet Size (Inches)
13.8 x 23.6 x 43.3
13.8 x 23.6 x 43.3
15.0 x 15.0 x 34.7
15.0 x 15.0 x 34.7
15.0 x 15.0 x 34.7
20.3 x 37.4
23.0 x 40.5
Salt Storage Capacity
175 lbs
175 lbs
240 lbs
240 lbs
240 lbs
350 lbs
420 lbs
Flow Rate @ 15 psi Pressure Drop
11.6 gpm
12.0 gpm
10.4 gpm
11.0 gpm
11.2 gpm
12.2 gpm
12.6 gpm
Flow Rate @ 25 psi Pressure Drop
15.6 gpm
16.0 gpm
14.3 gpm
15.0 gpm
15.1 gpm
16.2 gpm
16.6 gpm
Back Wash Flow Rate
2.0 gpm
2.4 gpm
1.5 gpm
2.0 gpm
2.4 gpm
3.5 gpm
5.0 gpm
Shipping Weight
93 lbs
110 lbs
105 lbs
122 lbs
155 lbs
158 lbs
244 lbs
Regeneration Type
Maximum Efficiency
Plumbing Connections
Resin Type
Electrical Requirements
Water Temperature
Water Pressure
Input 120V 60 Hz - Output 12V 650mA
Min 39 - Max. 100 degrees Fahrenheit
Min. 20 - Max. 125 psi
785-200
785-300
Counter Current / Up Flow
5,060 grains /lb salt
3/4" (Optional 1")
Canature 8% High Capacity Ion Exchange Resin
Specifications
785-75C
785-100C
785-75
785-100
785-150
75C
100C
75
100
150
200
300