3
Safety Guide
Check and comply with your provincial /
state and local codes. You must follow
these guidelines.
Use care when handling the water
softening system. Do not turn upside
down, drop, drag or set on sharp
protrusions.
The water softening system works on 12
volt-60 Hz electrical power only. Be sure to
use only the included transformer.
Transformer must be plugged into an
indoor 120 volt, grounded outlet only.
Use clean water softening salts only, at
least 99.5% pure. NUGGET, PELLET or
coarse SOLAR salts are recommended. Do
not use rock, block, granulated or ice
cream making salts. They contain dirt and
sediments, or mush and cake, creating
maintenance problems.
Keep the salt lid in place on the softener
unless servicing the unit or refilling with
salt.
WARNING
: This system is not
intended for treating water that is
microbiologically unsafe or of unknown
quality without adequate disinfection
before or after the system.
For your safety, the information in this manual must be followed to minimize the risk of
electric shock, property damage or personal injury.
Be sure to check the entire softener for any shipping damage or parts loss. Also note
damage to the shipping cartons. Contact the transportation company for all damage and
loss claims. The manufacturer is not responsible for damages in transit.
Small parts, needed to install the softener, are in a parts bag. To avoid loss of the small
parts, keep them in the parts bag until you are ready to use them.
Unpacking / Inspection
Table of Contents
PAGE
Unpacking / Inspection
3
Safety Guide
3
Proper Installation
4
Specification
5
Getting Started
5
Installation Instructions
7
Programming Instructions
10
Parts List
14
Care of your System
18
Warranty
19