Universial Vertical Low Flow Rite-Fit Heaters
Featuring:
Titanium elements
High limit safety reset switch
Visual Diagnostic System lights "VDS”
Multiple sensor/press. switch locations
HEATER DATA CHART
Heater model
Kilowatts
240v/120v
Amps
240v/120
27-V310-7T-K
5.5kW
1.4kW
22.9a.
11.5a.
27-V310-6T-K
4.5kW
1.13kW
18.8a.
9.4a.
27-V310-5T-K
4.0kW
1.0kW
16.7a.
8.4a.
27-V310-4T-K
3.0kW
.75kW
12.5a.
6.3a.
27-V310-2T-K
2.0kW
230v only
8.4a
230v only
WARNING!
This electrical heater should be installed by a qualified electrician or pool/spa technician
If you’re not qualified or do not have the technical experience to install this product
correctly STOP! and contact your heater provider
WARNING!
Removing the product label, disassembling, altering, damaging or subjecting heater to a
wet or dry fire will void the product warranty
PRECHECK - APPLICATIONS
Read through these instructions completely, prior to performing work.
Inspect for shipping or other damage. Do Not attempt to install a heater that appears damaged or missing parts
Confirm this heater has the same or less Kilowatt (kW) rating as the one being removed. Use heater data labels to
compare kW ratings. Do Not install a heater with a higher kW rating, contact your heater supplier with questions.
This heater is intended for vertical mounting applications only and should never be placed on its side, mounted
upside-down, or in areas that may spray or collect water. This product is intended for indoor use only
Heater requires a minimum consistent water flow rate of 6 gallons per minute and will operate at 110-240v.
Confirm proper operation of the electronic sensors and circ. pump being reused prior to installation
SAVE A COPY OF THESE INSTRUCTION
