Hydropath HydroFLOW i Series, Руководство пользователя

Страница: 7 / 12

• Place the unit on the bracket and hold in
place using the swinging plates.
• Secure by tightening the four steel nuts.
• Insert the two hexagon nuts into the holes
in the end plate, next to the ferrite holding
cage.
• The transducer unit is supplied with at
least one long ferrite bar. Insert this
through the holding cage until the holes
line up with the hexagon nuts.
• Take a second ferrite, insert a plastic
thumb screw through both ferrite bars and
loosely screw into hexagon nut.
• Repeat on opposite side.
Plate
Hexagon Nuts
Ferrite bars
Thumb screws
WARNING
The system must be used as
specified. Failure to do so
will prevent correct operation
of device and may impair
safety.
!
DO NOT POWER UP UNIT UNTIL ALL
FERRITES SUPPLIED ARE CONNECTED.
Plate