HYDROMEA LUMA 100, Руководство пользователя

Страница: 5 / 12

4/2021 LUMA 100 5
Figure 1: LumaConf modem configuration software
3.1 Connecting the modem
 Plug the LUMA modem with a serial adapter cable into a serial port, or via a USB-to-
serial converter. Connect a power supply to the cable (12 V – 36 V)

In the top left corner, set the correct COM port and baud-rate. The default setting is
115200 bps, but it may be different if the modems have been configured to another
baud-rate.

Click on "Config mode", and the parameters should become active (instead of greyed
out) if all settings and connections are correct.

The modem is now in configuration mode, which allows you to change the modem
settings. Changed settings will be applied instantly but will revert to the previous
settings after a power cycle. To save the new settings to the modem’s internal flash