4
LUMA 100
4/2021
Thermal fold-back:
The emitter of the modem consists of 12 high-power LEDs
composed of one bank of 6 LEDs and two banks of 3 LEDs each. During normal operation
all 12 LEDs are transmitting in parallel to provide the highest possible transmission
range. If the circuit board temperature rises above 60
°
C the modem will dynamically
switch off emitter banks until the temperature returns to a safe level.
3
Modem configuration
The LUMA modems can be configured with the
LumaConf
software, available here (note:
LumaConf for the LUMA 250LP also works with LUMA 100):
https://files.hydromea.com/luma/LumaConf_250LP.zip
The LUMA modems can be configured with the
LumaConf
software.
LumaConf
runs on
Windows 7, Windows 8 and Windows 10, 64 bit version. Installation is not required; simply
extract
lumaconf.exe
from the ZIP archive to a location of your preference (e.g. the
Desktop) and run it. Windows may generate a warning about running software downloaded
from the internet, which can be ignored.
