background image

Item # E-03-428  03/09

Part # 5625-428-1          

– Your Authorized Local Distributor –

USA

740 East 9th Street, Ashland, Ohio 44805

Tel: 419-289-3042  Fax: 419-281-4087

www.hydromatic.com

CANADA

269 Trillium Drive, Kitchener, Ontario, Canada N2G 4W5

Tel: 519-896-2163  Fax: 519-896-6337

© 2008 Hydromatic

®

Ashland, Ohio.  All Rights Reserved.

LIMITED PRODUCT WARRANTY

HYDROMATIC

®

warrants that its products are free from defects in material and workmanship for a period of

twelve (12) months from the date of purchase or eighteen (18) months from the date of manufacture, whichever

occurs first.
During the warranty period and subject to the conditions hereinafter set forth, 

HYDROMATIC

, will repair or

replace to the original user or consumer parts which prove defective due to defective materials or workmanship

of 

HYDROMATIC

. Contact the nearest authorized 

HYDROMATIC

distributor, 

HYDROMATIC

authorized

service center or 

HYDROMATIC

for warranty service. At all times, 

HYDROMATIC

shall have and possess

the sole right and option to determine whether to repair or replace defective equipment, parts or components.
Start up reports and electrical system schematics may be required to support warranty claims. Warranty is

effective only if 

HYDROMATIC

supplied or authorized control panels are used, where applicable. All dual

seal pumps must have seal failure and heat sensors attached, functional and monitored for the warranty to be

in effect. If a seal failure should occur, 

HYDROMATIC

will only cover the lower seal and labor thereof. If the

heat sensor and seal fail sensor is not attached and functional, the warranty is void. 

LABOR, ETC. COSTS: HYDROMATIC

shall in NO EVENT be responsible or liable for the cost of field labor,

removal and/or reinstallation charges of any 

HYDROMATIC

product, part or component thereof, or the

expense of freight.

THIS WARRANTY WILL NOT APPLY:

(a) to defects or malfunctions resulting from failure to properly install,

operate or maintain the unit in accordance with printed instructions provided; (b) to failures resulting from

abuse, accident or negligence; (c) to normal maintenance services and the parts used in connection with such

service; (d) to units which are not installed in accordance with applicable local codes, ordinances and good

trade practices; or (e) if the unit is moved from its original installation location; (f) unit is used for purposes

other than for what it was designed and manufactured; (g) to any unit which has been repaired or altered by

anyone other than 

HYDROMATIC

, a 

HYDROMATIC

distributor or a 

HYDROMATIC

authorized service

center and (h) to any unit which has been repaired using non factory specified parts/OEM parts.

RETURN OR REPLACED COMPONENTS:

any item to be replaced under this Warranty must be returned

to 

HYDROMATIC

in Ashland, Ohio, or such other place as 

HYDROMATIC

may designate, freight prepaid.

PRODUCT IMPROVEMENTS: HYDROMATIC

reserves the right to change or improve its products or any

portions thereof without being obligated to provide such a change or improvement for units sold and/or

shipped prior to such a change or improvement.
WARRANTY EXCLUSIONS: 

HYDROMATIC

MAKES NO EXPRESS OR IMPLIED WARRANTIES WHICH

EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. 

HYDROMATIC

SPECIFICALLY DISCLAIMS

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE. 
Some states do not permit some or all of the above warranty limitations and, therefore, such limitations may

not apply to you. No warranties or representations at any time made by any representatives of

HYDROMATIC

shall vary or expand the provision hereof.

LIABILITY LIMITATION: IN NO EVENT SHALL 

HYDROMATIC

BE LIABLE OR RESPONSIBLE FOR

CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES RESULTING FROM OR RELATED IN ANY MANNER

TO ANY 

HYDROMATIC

PRODUCT OR PARTS THEREOF. PERSONAL INJURY AND/OR PROPERTY DAMAGE

MAY RESULT FROM IMPROPER INSTALLATION. 

HYDROMATIC

DISCLAIMS ALL LIABILITY, INCLUDING

LIABILITY UNDER THIS WARRANTY, FOR IMPROPER INSTALLATION — 

HYDROMATIC

RECOMMENDS

INSTALLATION BY PROFESSIONALS.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above

limitation or exclusion may not apply to you.
This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
In the absence of suitable proof of this purchase date, the effective date of this warranty will be based upon

the date of manufacture.

Содержание HPD200













Отзывы: