BOAT LIFT OPERATION
DO
DON’T
Always use guide ropes. They are
required for proper positioning of the
boat and if they are not used (for those
applications specified in this instruction
manual) your warranty is void.
Allow anyone in the boat during the
lifting or the launching operation.
Always raise the hoist if it is not used
for an extended period of time (more
than a day), or if the water is rough.
The hoist will survive storms and
rough water much better in the raised
position.
Operate the blower with the valve
closed or in the Dry-Dock position,
blower damage can result.
Secure the boat to the boat dock
or landing in case the hoist is
accidentally lowered in
you absence.
Start the blower while launching the
boat. Only open the valve by moving
it to the Lift/Launch position.
Leave your boat on the hoist during
winter if you desire. Stationary ice will
not damage the hoist if it is up.
Secure any part of the boat,
boat accessories, or boat cover
to the lift.
Follow the instructions in this manual
and your hoist will give you years of
trouble-free service.
Grease the hoist.
Lubrication is NOT required.
Contact HydroHoist Marine Group
for any additional accessories and
products at
www.boatlift.com
.
Attempt to raise any boat other
than the one for which the hoist
was adjusted. Hoist or boat damage
can occur. Your dealer can make
adjustments to the hoist for a
different boat.
Note: Hoist is installed as either a pull
in or back in. For safe operation, the
boat cannot be loaded opposite to
how the hoist is installed.
Push back excessively on the boat
while the hoist is lifting. Push back
just enough to tighten the Guide
Ropes and only until the hoist makes
contact with the boat.
HydroHoist Boat Lifts • Owner’s Manual
6
