TO LIFT BOAT:
1. Position boat over lift and attach guide ropes to rear cleats of boat. Push boat
back until guide ropes are taut and bow is centered over lift.
2a. Two Tank Models:
With Rapid Launch handle in the down position (closed) rotate valve handles
to
LIFT/LAUNCH
.
2b. Three to Five Tank Models: With Rapid Launch handle in the down position
(closed) rotate the two valve handles leading to the
OUTBOARD
tanks only to
LIFT/LAUNCH
- leave other valve handles in
DRY DOCK
.
3. Both Models:
Turn Blower Switch ON.
NOTE: If Blower does not activate, reset GFCI switch.
4. Both Models: Release boat when lift contacts the hull.
5. Three to Five Tank Models: When large air bubbles appear from under the
outboard tanks, rotate valve handle leading to
CENTER
tank to
LIFT/LAUNCH
.
6. Both Models: When large air bubbles appear from under all tanks, turn Blower
Switch OFF and rotate all valve handles to
DRY DOCK
.
TO LAUNCH BOAT:
1. Raise Rapid Launch handle to the up position (open).
2a. Two Tank Models: Rotate valve handles to
LIFT/LAUNCH
.
2b. Three to Five Tank Models: Exhaust the
CENTER
tank
FIRST
Rotate to
LIFT/
LAUNCH
valve handle leading to
CENTER
tank. When air can no longer be
heard exhausting from
CENTER
tank, rotate valve handle leading to the
OUTBOARD
tanks to
LIFT/LAUNCH
, and rotate to
DRY DOCK
valve handle
leading to
CENTER
tank. When the boat is floating freely, rotate all valve han-
dles to
DRY DOCK
.
ULTRALIFT
™
10,000-32,000
HydroHoist Boat Lifts • Owner’s Manual
4
