Installation
Sec. 3 Pg. 3
Step
Procedure
2.1
Drill four 3/8” holes into dock face and attach the Extended Hinge Mooring Plate [1]. If using the HD Dock Brack-
et [4] with Hinge Mooring Plate holes will only need to be drilled if using thru
-
bolt method of dock bracket connec-
tion. NOTE:
IT IS UP TO THE INSTALLER TO DETERMINE IF THE ATTACHMENT IS STRONG
ENOUGH . ADDITIONAL REINFORCEMENT MAY BE NECESSARY IN ROUGH WATER.
2.2
Bolt the Rigid Mount Floating Mooring Link [2] [3] to either Hinge Mooring Plate [1] as shown. It is best to bolt
Mooring Link 1 hole above its natural floating position depending on the watercraft.
Do not tighten to the point the
bracket clamps the link.
Installation Instructions
Rigid Mount Floating Dock Only
Fig F.
MUST ANCHOR TOP OF BRACKET
Fig H. (OPTIONAL)
HydroHoist Marine Group
Model: HYDROPORT PRO
Fig G.
ITEM #
PART NUMBER
DESCRIPTION
QTY.
1
4150170
EXTENDED HINGE MOORING PLATE
2
2
4150180
BRACKET
-
UPPER RIGID MOORING
2
3
4150185
BRACKET
-
LOWER RIGID MOORING
2
4
5048001
HEAVY DUTY DOCK BRACKET
2
