HydroHoist HydroPort PRO, Руководство по установке

Страница: 5 / 18

Assembly
Sec. 2 Pg. 1
Step Procedure
1.1 Insert the Bow Bumper [2] into the Main Body by inserting the barbed feature on the bottom side of the Bow Bumper [1]
into the hole on the Main Body and pushing down until it is firmly seated.
1.2 Slide the In Line Axle [6] through the In Line Wheel [7] with an Axle Spacer [8] placed on each side of the wheel. Screw
[2] down Fig B in the Main Body. DO NOT OVERTIGHTEN
1.3 Slide the Bow Axle [5] through the Bow Roller [4] push into the pocket on the Main Body. Place Retainer [3] on top of
the Bow Axle [5] and Screw [2] into the Main Body. DO NOT OVERTIGHTEN
Assembly Instructions
Notes:
Steps 1.1
-
1.3 are already done on purchased unit.
Fig B.
HydroHoist Marine Group
Model: HYDROPORT PRO
Fig C.
Fig A.
ITEM # PART NUMBER DESCRIPTION QTY.
1 4150081 BOW BUMPER W/BARB 1
2 4150008 1/4
-
20 X.75 SCREW 28
3 4150007 RETAINER, BOW ROLLER 4
4 4150017 BOW ROLLER 2
5 4150016 BOW ROLLER AXLE 2
6 4150025 INLINE ROLLER AXLE 10
7 4150022 WHEEL, INLINE 4IN ROUND 10
8 2021900 SPACER 20
Fig C.