INSTRUCTIONS
5
• When the unit is off, press the TIMER button to initiate the Auto-on start program. Pressing it
again within five seconds will initiate the Auto-off stop program.
• Press or hold the UP or DOWN button to change the Auto time by 0.5 hour increments, up to 10
hours, then at 1 hour increments up to 24 hours. The control will count down the time remaining
until start.
• The system will automatically revert back to displaying the previous temperature setting if there
is no operation in a five seconds period.
• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Auto
Start/Stop timer program.
• When malfunction (E1, E2 or E4) occurs, the Auto Start/Stop timed program will
also be cancelled.
SLEEP OPERATION
Press this button and the selected temperature will increase by 10C/10F after 30 minutes. The
temperature will then increase by another 10C/10F after an additional 30 minutes. This new
temperature will be maintained for 7 hours before it returns to the originally selected temperature.
This ends the Sleep mode and the unit will continue to operate as originally programmed.
NOTE: This feature is unavailable under FAN or DRY mode.
OTHER FEATURES
Auto-Restart
If the unit shuts down unexpectedly due to a power cut, it will restart with the previous function
setting automatically when the power resumes.
Wait 3 minutes before resuming operation
After the unit has stopped, it cannot be restarted until 3 minutes have elapsed. This is to protect the
unit. Operation will automatically start after 3 minutes.
Air flow direction adjustment
The louvre can be adjusted automatically. When the Power is ON, the louvre opens fully. Press the
SWING button on the panel or remote controller to initiate the Auto swing feature. The louvre will
swing up and down automatically. Please do not adjust the louvre manually.
INSTALLATION INSTRUCTIONS
Location
• The air conditioner should be placed on a firm foundation
to minimize noise and vibration. For safe and secure
positioning, place the unit on a smooth, level floor strong
enough to
support the unit.
• The unit has casters to aid placement, but it should only be
rolled on smooth, flat surfaces. Use caution when rolling on
carpet surfaces. Do not attempt to roll the unit over objects.
• The unit must be placed within reach of a properly rated
grounded socket.
• Never place any obstacles around the air inlet or outlet of
the unit.
• Allow 12
"
/30 cm to 39
"
/100 cm of space from the wall with
for efficient air-conditioning.
