8
Figure 6: Rinse aid hose connection
Cable ties are provided in the fittings kit so that tubing can be tied
together / the wall to create a neat and safe installation.
Inlet Tubing
.
1. Connect the tubing from the EvoRinse to the inlet on the rinse pump
(left hand fitting). Loosen the compression fitting by 1 turn, then
push the tube into the fitting and tighten.
Outlet Tubing
1. Install one end into the outlet of the rinse pump (right hand fitting).
Loosen the compression fitting by 1 turn, then push the tube into
the fitting and tighten.
Rinse Aid Tube Connection - EvoRinse Unit
NOTE Ensure there are no kinks or sharp bends in the tubing between the unit
and the rinse injection fitting, to ensure free flow of rinse chemical into
the water line.
