HYDRO-RAIN ORBIT SPRINKLER SYSTEM DESIGNER Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 31

background image

ORBIT

®

SPRINKLER SySTEm DESIGNER™

InstallatIon GuIde

WoRKInG WItH

Tools and Materials Required: Fittings, pipe tape, channel locks

Step 1: Uncoil pipe and lay flat prior to installation to reduce pipe recoil.

Step 2: Mark pipe 1" (25mm) from end.

Step 3: Push pipe into fitting until mark on pipe is even with end of fitting.

Step 1. Hold the pipe firmly in one hand and place

the fore- and index fingers of your other hand over

the black release ring.

Step 2. Pull the release ring and pipe firmly

away from each other while rotating the pipe in a

clockwise direction until the fitting separates from

the pipe.

Step 3. Cut off scored end of the pipe prior to

reusing (you will see teeth marks on the pipe from

the fitting and these will prevent proper reseal).

aPPendIx

Blu-Lock is the fastest way to install an automatic sprinkler system and it offers several other distinct
advantages over insert fittings. While Poly pipe, fittings and joints are well-suited to the constant-pressure
environment of the mainline - which is typically about 10-20% of the total pipe in your system - Blu-Lock is
ideally suited for all sprinkler zone pipes (those going out from the valve manifold) because it is fast to
install, flexible, has a very long useful life, is clean to produce, and is recyclable.

JOINING BLU-LOCK PIPE AND FITTINGS

Blu-Lock pipe and fittings are designed to be used exclusively together. NEVER use another
manufacturer's pipe with Blu-Lock fittings. To install Blu-Lock, follow these simple steps:

The steps for joining Blu-Lock threaded fittings are the same as for PVC, as described above.

Please note the following warning which applies to all Blu-Lock fittings and pipe:

WARNING:

For non-constant pressure valve-out cold water outdoor direct burial irrigation connections only.

Blu-Lock fittings contain sharp, stainless steel retainer ring. Do not insert fingers into fittings. Keep fittings
and bags away from children. Do not use pipe dope. Do not kink pipe. If pipe kinks, discard kinked section.

Most 1/2" Blu-Lock fittings are designed with a release ring that allows the fitting to be reused. This is
another advantage that Blu-Lock has over PVC. In order to release the fitting, follow these steps:

REMOVING BLU-LOCK PIPE FITTINGS

«
...
27
28
29
30
31
»

Содержание ORBIT SPRINKLER SYSTEM DESIGNER
































Отзывы:

Нет отзывов

Похожие инструкции для ORBIT SPRINKLER SYSTEM DESIGNER

Бренд: Zodiac Страницы: 16

Бренд: R.V.R. Elettronica Страницы: 38

Бренд: Water Well Страницы: 5

Ecoflo STB-570-P

Бренд: Premier Tech Aqua Страницы: 20

Бренд: Onn Страницы: 11

Бренд: Vega Страницы: 16

Box Design BT Box S2

Бренд: Pro-Ject Audio Systems Страницы: 6

Бренд: Tecno-gaz Страницы: 122

HiFlo Ro-Moobil RO60S

Бренд: unGer Страницы: 16

Бренд: American Audio Lab Страницы: 31

Бренд: 3M Страницы: 113

Бренд: Dyna-Glo Страницы: 9

Бренд: 2easy Страницы: 21

Marine Pro RIO 216

Бренд: auto maskin Страницы: 11

IP-VarioBell IPVB-00

Бренд: Alphatech Страницы: 91

Бренд: Jensen Страницы: 41

Бренд: BAS-IP Страницы: 59

Бренд: Waldbeck Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды